Yaesu FT-857D

Type:	             Amateur HF/VHF/UHF transceiver
Frequency range:    TX: 10-160 m.

                    TX WARC 30m - 10,100-10,150 MHz
                    TX WARC 17m - 18,068-18,168 MHz
                    TX WARC 12m - 24,890-24,990 MHz

                    TX: 
                    60 m  - 
                     6 m  -  50-55  MHz
                     2 m  - 137-164 MHz
                    70 cm - 420-470 MHz

                    TX Mod: 11m & PMR446

                    RX: 0.1-76 MHz
                     WFM  -  76-108 MHz
                     2 m  - 118-137 MHz
                     2 m  - 137-164 MHz
                    70 cm - 420-470 MHz

Mode:	             AM/FM/SSB/CW and WFM (RX only)
RF Power output:    6-160 m: 100 W 2 m: 50 W 70 cm: 20 W
Voltage:	     13.8 VDC
Current drain:	     RX: 0.6-1 A
                    TX: Max 22 A
Impedance:	     50 ohms, 1*SO-239 + 1*N-type
Dimensions (W*H*D): 155*52*233 mm
Weight:	     2.1 Kg
Manufactured:	     2004-200x
Other:	             Built-in keyer. 
                    Beacon mode. 
                    32 color display.
                    CTCSS. 
                    200 memories. 
                    Detachable front panel.
                    DSP included in this updated version

Menüü ja menüü funktsioonide kirjeldus

See Adjust_Menu for second set of menu functions

Main Menu Commands

No	Menu Item	Function	Available Values	Default
001	EXT MENU	Enables/Disables the extended Menu Mode.	ON/OFF	OFF
002	144MHz ARS	Activates/deactivates the Automatic Repeater Shift feature when operating on the 144 MHz band.	ON/OFF	×1
003	430MHz ARS	Activates/deactivates the Automatic Repeater Shift feature when operating on the 430 MHz band.	ON/OFF	×1
004	AM&FM DIAL	Enabling/disabling the DIAL knob on the AM and FM modes.	ENABLE/DISABLE	DISABLE
005	AM MIC GAIN	Adjusts the microphone gain level for the AM mode.	0 ~ 100	50
006	AM STEP	Selects the tuning steps for the MEM/VFO CH knob on the AM mode.	2.5/5/9/10/12.5/25kHz	×1
007	APO TIME	Selects the Auto Power Off time (time before power goes off).	OFF/1h ~ 6h	OFF
008	ARTS BEEP	Selects the ARTS beep mode.	OFF/RANGE/ALL	RANGE
009	ARTS ID	Enables/disables the CW identifier during ARTS operation.	ON/OFF	OFF
010	ARTS IDW	Stores your callsign into the CW identifier.	–	YAESU
011	BEACON TEXT 1	Stores the message for the Beacon.	–	–
012	BEACON TIME	Selects the interval time (between message and message).	OFF/1 sec ~ 255 sec	OFF
013	BEEP TONE	Selects the beep frequency.	440/880/1760 Hz	880 Hz
014	BEEP VOL	Selects the beep volume level.	0 ~ 100	50
015	CAR LSB R	Sets the Rx Carrier Point for LSB.	–300 ~ +300 Hz	0 Hz
016	CAR LSB T	Sets the Tx Carrier Point for LSB	–300 ~ +300 Hz	0 Hz
017	CAR USB R	Sets the Rx Carrier Point for USB	–300 ~ +300 Hz	0 Hz
018	CAR USB T	Sets the Tx Carrier Point for USB	–300 ~ +300 H	0 Hz
019	CAT RATE	Sets the transceiver’s circuitry for the CAT baud rate to be used.	4800bps/9600bps/38400bps	4800bps
020	CAT/LIN/TUN	Selects the device which is connected to the CAT/LINEAR jack on the rear panel.	CAT/LINEAR/TUNER	CAT
No	Menu Item	Function	Available Values	Default
021	CLAR DIAL SEL	Defines the “control” knob to be used for setting of the clarifier offset frequency.	CLAR, M/V, MAIN	CLAR
022	CW AUTO MODE	Selects whether the KEY jack shall be “Enabled” or “Disabled” while using the SSB/FM modes.	ON/OFF	OFF
023	CW BFO	Sets the CW carrier oscillator injection side on the CW mode.	USB/LSB/AUTO	USB
024	CW DELAY	Sets the receiver recovery time during pseudo-VOX CW semi break- in operation.	FULL/30 ~ 3000 msec	250 msec
025	CW KEY REV	Sets the keyer paddle’s wiring configuration.	NORMAL/REVERSE	NORMAL
026	CW PADDLE	Enables/disables CW keying by the microphone’s [UP]/[DWN] keys.	ELEKEY/MICKEY	ELEKEY
027	CW PITCH	Setting of the pitch of the CW sidetone, BFO offset, and CW filter center frequencies.	400 ~ 800 Hz	700 Hz
028	CW QSK	Selects the time delay between when the PTT is keyed and the car- rier is transmitted during QSK operation when using the internal keyer.	10/15/20/25/30 ms	10 ms
029	CW SIDE TONE	Setting of the CW sidetone volume level.	0 ~ 100	50
030	CW SPEED	Sets the sending speed for the built-in Electronic keyer.	4 ~ 60 wpm (1wpm/step)/ 20 ~ 300 cpm (5cpm/step)	12 wpm (60 cpm)
031	CW TRAINING	Sends random Morse Code five-character groups via the sidetone.	N, A, AN	N
032	CW WEIGHT	Sets the Dot:Dash ratio for the built-in electronic keyer.	1:2.5 ~ 1:4.5	01:03.0
033	DCS CODE	Setting of the DCS code.	104 Standard DCS codes	23
034	DCS INV	Selects “Normal” or “Inverted” DCS coding.	Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv	Tn-Rn
035	DIAL STEP	Setting of the DIAL knob’s tuning speed.	FINE/COARSE	FINE
036	DIG DISP	Defines the displayed frequency offset during DIG (USER-L or USER-U) mode operation.	–3000 ~ +3000 Hz	0 Hz
037	DIG GAIN	Adjusts the audio input level from terminal equipment during DIG (Digital) mode operation.	0 ~ 100	50
038	DIG MODE	Selects the mode and sideband in the DIG (Digital) mode.	RTTY-L/RTTY-U/PSK31-L/ PSK31-U/USER-L/USER-U	RTTY-L
039	DIG SHIFT	Defines the carrier frequency offset during DIG (USER-L or USER- U) mode operation.	–3000 ~ +3000 Hz	0 Hz
040	DIG VOX	Sets the gain of the VOX circuitry’s input level for the DIG mode.	0 100	0
No	Menu Item	Function	Available Values	Default
041	DISP COLOR	Selects the illumination color for each operating status.	–	–
042	DISP CONTRAST	Setting of the display contrast level.	0 13	5
043	DISP INTENSITY	Setting of the display brightness level.	0 (Dim) 3 (Bright)	3
044	DISP MODE	Sets up the LCD Lamp mode.	OFF/AUTO1/AUTO2/ON	AUTO2
045	DSP BPF WIDTH	Setting of the bandwidth for the DSP CW audio filter.	60/120/240 Hz	240 Hz
046	DSP HPF CUTOFF	Adjusts the low-cut characteristics of the DSP HPF filter.	100 1000 Hz	100 Hz
047	DSP LPF CUTOFF	Adjusts the high-cut characteristics of the DSP LPF filter.	1000 6000 Hz	6000 Hz
048	DSP MIC EQ	Sets the DSP microphone equalization pattern.	OFF/LPF/HPF/BOTH	OFF
049	DSP NR LEVEL	Setting of the degree of DSP Noise Reduction.	1 16	8
050	EMERGENCY	Enables Tx/Rx operation on the Alaska Emergency Channel, 5167.5 kHz.	ON/OFF	OFF
051	FM MIC GAIN	Adjusts the microphone gain level for the FM mode.	0 100	50
052	FM STEP	Selects the tuning steps for the MEM/VFO CH knob in the FM mode.	5/6.25/10/12.5/15/20/25/ 50 kHz	×2
053	HOME-->VFO	Enables/disables the moving of HOME channel data to the VFO.	ON/OFF	ON
054	LOCK MODE	Selects the operation of the front panel’s LOCK key.	DIAL/FREQ/PANEL/ALL	DIAL
055	MEM GROUP	Enables/disables the memory grouping feature.	ON/OFF	OFF
056	MEM TAG	Stores Alpha-Numeric “Tags” for the memory channels.	–	–
057	MEM/VFO DIAL MODE	Selects the function which is engaged when you press the MEM/ VFO CH knob.	CW SIDETONE, CW SPEED, MHz/MEM GRP, MIC GAIN, NB LEVEL, RF POWER, STEP	MHz/MEM GRP
058	MIC SCAN	Enables/disables scanning access via the microphone’s [UP]/ [DWN] keys.	ON/OFF	ON
059	MIC SEL	The choice of the equipment which connects to the MIC jack.	NOR/RMT/CAT	NOR
060	MTR ARX SEL	Select the meter display configuration while the transceiver is receiving.	SIG, CTR, VLT, N/A, FS, OFF	SIG
No	Menu Item	Function	Available Values	Default
061	MTR ATX SEL	Selects the meter display configuration while the transceiver is transmitting.	PWR, ALC, MOD, SWR, VLT, N/A, OFF	PWR
062	MTR PEAK HOLD	Enabling/disabling of the “peak hold” function of the meter.	ON/OFF	ON
063	NB LEVEL	Setting of the blanking level for the IF Noise Blanker.	0 100	50
064	OP FILTER 1	Not available at this time.	–	–
065	PG A	Programming the [A] key (in the Operating Function Row 17) function.	All Multi Function , all Menu Item, MONI, Q.SPL, TCALL, ATC and USER.	MONI
066	PG B	Programming the [B] key (in the Operating Function Row 17) function.		Q.SPL
067	PG C	Programming the [C] key (in the Operating Function Row 17) function.		ATC
068	PG ACC	Not available at this time.	–	–
069	PG P1	Not available at this time.	–	–
070	PG P2	Not available at this time.	–	–
071	PKT 1200	Adjusts the audio input level from the TNC during 1200 bps Packet operation.	0 100	50
072	PKT 9600	Adjusts the audio input level from the TNC during 9600 bps Packet operation.	0 100	50
073	PKT RATE	Sets the transceiver’s circuitry for the Packet baud rate to be used.	1200/9600 (bps)	1200 bps
074	PROC LEVEL	Sets the compression level for the AF speech processor in the SSB/AM modes.	0 100	50
075	RF POWER SET	Setting of the maximum power level for the current band.	5 100	100
076	RPT SHIFT	Sets the magnitude of the repeater shift.	0.00 99.99 (MHz)	×2
077	SCAN MODE	Selects the desired Scan-Resume mode.	TIME/BUSY/STOP	TIME
078	SCAN RESUME	Sets the delay time for scanning resumption.	1 10 (sec)	5 sec
079	SPLIT TONE	Enables/disables split CTCSS/DCS cording.	ON/OFF	OFF
080	SQL/RF GAIN	Selects the configuration of the front panel’s SQL/RF knob.	RF-GAIN/SQL	×1
No	Menu Item	Function	Available Values	Default
081	SSB MIC GAIN	Adjusts the microphone gain level for the SSB mode.	0 100	50
082	SSB STEP	Selects the tuning steps for the MEM/VFO CH knob on the SSB mode.	1kHz/2.5kHz/5kHz	2.5 kHz
083	TONE FREQ	Setting of the CTCSS Tone Frequency.	50 Standard CTCSS tones	88.5 Hz
084	TOT TIME	Select the Automatic Power Off time.	OFF/1 20 (min)	OFF
085	TUNER/ATAS	Selects the device (FC-30 or ATAS-100/-120) to be controlled via the front panel’s [A](TUNE) key.	OFF/ATAS(HF)/ATAS(HF&50) /ATAS(ALL)/TUNER	OFF
086	TX IF FILTER	Selects the Transmit IF filter.	CFIL/FIL1/FIL2	CFIL
087	VOX DELAY	Sets the “hang time” for the VOX circuitry.	100 3000 (ms)	500 ms
088	VOX GAIN	Sets the gain of the VOX circuitry’s input audio detector.	1 100	50
089	XVTR A FREQ	Allows an arbitrary frequency to be set on the display, to allow direct frequency readout during transverter operation.	00,000,00 99,999,99 (kHz)	–
090	XVTR B FREQ
091	XVTR SEL	Enables/disables/selects the antenna port to be used for Transverter operation.	OFF/X VTR A/X VTR B	OFF

×1: Depends on transceiver version.
×2: Depends on operating band and transceiver version.

Tähtsamad heli ja muud seaded menüüst

001	EXT MENU	ON	-
005	AM MIC GAIN	80	TX AM
041	DISP COLOR	FIX:26	-
042	DISP CONTRAST	4	-
043	DISP INTENSITY	1	-
044	DISP MODE	AUTO2	-
046	DSP HPF CUTOFF	280	RX
047	DSP LPF CUTOFF	2690	RX
048	DSP MIC EQ	HPF	TX
051	FM MIC GAIN	80	TX FM
052	FM STEP	25	-
054	LOCK MODE	ALL	-
065	PG A	A/B	-
066	PG B	IPO	RX
067	PG C	MONI	RX
074	PROC LEVEL	50	TX SSB/AM
075	RF POWER SET	100	TX
080	SQL/RF GAIN	RF-GAIN	RX
081	SSB MIC GAIN	80	TX SSB
082	SSB STEP	1	-

Peidedetud menüü

I want to warn you do not change these values unless you are sure of what you are doing. To get them turn transceiver off. Press and hold the A,B,C keys; while holding them in, press and hold in the [PWR] switch for 1/2 second to turn the tranceiver On. Now let go of all keys. Attention, for menu NO-017. Input voltage 13.8V = 138 to calibre voltmeter. Press F key to finish.

=============================================================
Adjust-No      Function            Setting  Mode    Frequency
=============================================================
NO-001         HF1-RXG             68         CW     1.840.00
NO-002         HF2-RXG             66         CW     7.035.15
NO-003         HF3-RXG             66         CW    21.070.15
NO-004         50M-RXG             64         CW    50.107.50
NO-005         VHF-RXG             65         CW   145.437.50
NO-006         UHF-RXG             64         CW   438.900.00
NO-007         SSB-S9              88         CW    21.070.15
NO-008         SSB-FS              54         CW    21.225.13
NO-009         FM-S1               68         FM   145.437.50
NO-010         FM-FS               99         FM   145.437.50
NO-011         DISC-L              50         FM   145.437.50
NO-012         DISC-H              79         FM   145.437.50
NO-013         FM-TH1              100        FM   145.437.50
NO-014         FM-TH2              100        FM   145.437.50
NO-015         FM-TI1              10         FM   145.437.50
NO-016         FM-TI2              10         FM   145.437.50
NO-017         VCC                 138        FM   145.437.50
NO-018         HF1-IC              83         CW     1.800.00
NO-019         HF2-IC              80         CW     7.068.19
NO-020         HF3-IC              87         CW    21.225.13
NO-021         50M-IC              84         CW    50.000.00
NO-022         VHF-IC              72         CW   145.437.50
NO-023         UHF-IC              74         CW   438.900.00
NO-024         HF1-PO-MAX          165        CW     1.800.00
NO-025         HF1-PO-MID2         105        CW     1.800.00
NO-026         HF1-PO-MID1         31         CW     1.800.00
NO-027         HF1-PO-MIN          13         CW     1.800.00
NO-028         HF2-PO-MAX          159        CW     7.068.19
NO-029         HF2-PO-MID2         102        CW     7.068.19
NO-030         HF2-PO-MID1         29         CW     7.068.19
NO-031         HF2-PO-MIN          11         CW     7.068.19
NO-032         HF3-PO-MAX          158        CW    21.225.13
NO-033         HF3-PO-MID2         101        CW    21.225.13
NO-034         HF3-PO-MID1         29         CW    21.225.13
NO-035         HF3-PO-MIN          11         CW    21.225.13
NO-036         50M-PO-MAX          145        CW    50.000.00
NO-037         50M-PO-MID2         92         CW    50.000.00
NO-038         50M-PO-MID1         47         CW    50.000.00
NO-039         50M-PO-MIN          8          CW    50.000.00
NO-040         VHF-PO-MAX          87         CW   145.437.50
NO-041         VHF-PO-MID          43         CW   145.437.50
NO-042         VHF-PO-MIN          7          CW   145.437.50
NO-043         UHF-PO-MAX          112        CW   438.900.00
NO-044         UHF-PO-MIN          16         CW   438.900.00
NO-045         HF1-TXG             48         USB    1.800.00
NO-046         HF2-TXG             38         USB    7.068.19
NO-047         HF3-TXG             43         USB   21.225.13
NO-048         50M-TXG             40         USB   50.000.00
NO-049         VHF-TXG             47         USB  145.437.50
NO-050         UHF-TXG             49         USB  438.900.00
NO-051         ALC1-M              203        USB   21.225.13
NO-052         ALC-M               85         USB   21.225.13
NO-053         HF1-REV-ALC         61         CW     1.800.00
NO-054         HF2-REV-ALC         56         CW     7.068.19
NO-055         HF3-REV-ALC         50         CW    21.225.13
NO-056         50M-REV-ALC         47         CW    50.000.00
NO-057         VHF-REV-ALC         62         CW   145.437.50
NO-058         UHF-REV-ALC         57         CW   438.900.00
NO-059         CW-CAR-LEVEL        144        CW    21.225.13
NO-060         AM-CAR-LEVEL        125        AM    21.225.13
NO-061         DEV-W               216        FM   145.437.50
NO-062         DEV-N               110        FM   145.437.50
NO-063         MOD-MTR             200        FM   145.437.50
NO-064         DTMF-DEV            10         FM   145.437.50
NO-065         CTCSS-DEV           233        FM   145.437.50
NO-066         DCS-DEV             168        FM   145.437.50
NO-067         LSB-CAR-POINT       -7         LSB   21.225.13
NO-068         USB-CAR-POINT       +5         USB   21.225.13
NO-069         VSWR2 at 10W        17         CW    14.257.90
NO-070         VSWR3 at 10W        42         CW    14.257.90
NO-071         ATAS-TEST                      LSB   14.257.90
NO-072         AMTR-TEST                      LSB   14.257.90
NO-073         HTEMP-THRESHOLD     38         LSB   14.257.90
NO-074         FTEMP-THRESHOLD     102        LSB   14.257.90

Kasulikud menüü seaded

Toon 1750   - Hoiad all HOME klahvi seni kuni toon eetrisse läheb.
CTCSS skänn - FUNC -> SELECT -> [TON, –––, TDCH] -> C (TDCH)
DCS skänn   - FUNC -> SELECT -> [TON, –––, TDCH] -> A x 3 (DCS ) -> C (TDCH)
Jaama Reset - Hoia all F + V/M ja lülita jaam välja.

TX avamine 1.8-56MHz, 137-164MHz, 420-470MHz

 HF: TX on   1.800 MHz through to  33.000 MHz no breaks.
VHF: TX on  33.000 MHz through to  56.000 MHz no breaks.
VHF: TX on 137.000 MHz through to 164.000 MHz no breaks.
UHF: TX on 420.000 MHz through to 470.000 Mhz no breaks.

Plaat enne avamist (UK versioon)

Plaat peale avamist

Vajalikud jooted TX avamise puhul

----JAAMA TAGUMINE POOL------

1007 - Jumper - (Tuleb lühistada)
1008 - Jumper - On juba lühistet.
1009 - Jumper - (Tuleb lühistada)
1004 - Blank  - Oli tühi ja jääb tühjaks.
1005 - Blank  - Oli tühi ja jääb tühjaks.
1006 - Jumper - On juba lühistet UK versil, kuid mitte DE versil.
1001 - Blank  - (Tuleb eemaldada)
1002 - Blank  - (Tuleb eemaldada) avab 40m 7.100 to 7.200 mhz (UK versioonil kinni algselt)
1003 - Blank  - Oli tühi ja jääb tühjaks.

----JAAMA ESIMENE POOL-----

Peale klemmide eemaldamist vajuta ja hoia all [FUNC] ja [V/M] ja lülita raadio tööle.

jumperite erinevad variandid

Sagedused erinevate jumprite asetuse korral

Type	TX Frequency Range			RX Frequency Range			JUMPER (J10**)						Remarks
	HF	VHF	UHF	HF	VHF	UHF	01	02	03	07	08	09	FM CH Step	RPT Shift
B1	BAND 1	144-146	430-440	0.1-30/50-54/87.5-108	144-146	430-440	X	X	X	X	X		12.5/25kHz	0.1/0/0.6/7.6MHz
B2	BAND 1	144-146	430-440	0.1-33/33-56/76-108	118-164	420-470	X	X			X		12.5/25 kHz	0.1/0/0.6/7.6MHz
B3	BAND 2	137-164	420-470	0.1-33/33-65/76-108	118-164	420-470	X				X		12 .5/25kHz	0.1/0/0.6/7.6MHz
C1	BAND 3	144-146	430-440	0.1-30/50-54/87.5-108	144-146	430-440	X	X	X		X		12.5/25kHz	0.1/0.5/0.6/1.6MHz
C2	BAND 3	144-146	430-440	0.1-33/33-56/76-108	118-164	420-470	X	X			X		12.5/25kHz	0.1/0.5/0.6/1.6MHz
C3	BAND 2	137-164	420-470	0.1-33/33-56/76-108	118-164	420-470	X				X		12.5/25kHz	0.1/0.5/0.6/1.6MHz
D1	BAND 4	144-146	432-438	0.1-30/50-54/87.5-108	144-146	432-438	X	X	X	X	X		12.5/25kHz	0.1/0/0.6/1.6MHz
D2	BAND 4	144-146	432-438	0.1-33/33-56/76-108	118-164	420-470	X	X		X	X		12.5/25kHz	0.1/0/0.6/1.6MHz
E1	BAND 5	144-146	430-440	0.1-30/50-54/87.5-108	144-146	430-440	X	X	X			X	12.5/25kHz	0.1/0/0.6/1.6MHz
E2	BAND 5	144-146	430-440	0.1-33/33-56/76-108	118-164	420-470	X	X				X	12.5/25kHz	0.1/0/0.6/1.6MHz
E3	BAND 2	137-164	420-470	0.1-33/33-56/76-108	118-164	420-470	X					X	12.5/25kHz	0.1/0/0.6/1.6MHz

BAND	160 m	80 m	40 m	30 m	20 m	17 m	15 m	12 m	10 m	6 m
1	1.815-1.890	3.500-3.800	7.000-7.100	10.100-10.150	14.000-14.350	18.068-18.168	21.000-21.450	24.890-24.990	28.000-29.700	50.000-52.000
2	1.800-2.000	3.500-4.000	7.000-7.500	10.000-10.500	14.000-14.500	18.000-18.500	21.000-21.500	24.500-25.000	28.000-30.000	50.000-54.000
3	1.800-2.000	3.500-3.800	7.000-7.100	10.000-10.150	14.000-14.350	18.068-18.168	21.000-21.450	24.890-24.990	28.000-29.700	50.000-52.000
4	1.820-1.850	3.500-3.800	7.000-7.100	10.100-10.150	14.000-14.350	18.068-18.168	21.000-21.450	24.890-24.990	28.000-29.700	50.200-52.000
5	1.810-1.850	3.500-3.801	7.000-7.100	10.100-10.150	14.000-14.350	18.068-18.168	21.000-21.450	24.890-24.990	28.000-29.700	50.200-51.200

Jumpers 1004, 1005, and 1006 are not listed on the original document, however they appear to be geographically based. 1006 for example is set for US and AU models and not set for DE and FR models. Additionally, 1006 enables menu 50 which is the Alaskan emergency frequency.

Mikrofoni RJ45 pistiku PIN-d

Nr Mic Mode           Extra Functions
1  FAST               Power Switch
2  Ground (control)   PTT (Ground)
3  PTT                PTT
4  Mic AF             Mic AF
5  Ground (Mic)       Ground (Mic)
6  + 5V               + 5V
7  UP                 RXD
8  DOWN               TXD

CAT ja DATA pin-d

CAT kaabel

DATA & CAT cable

Separation kit YSK-857

The YSK-857 Separation Kit consists of Front Panel mounting hardware and two 19.6 foot (6 m) interconnecting cables for the Front Panel. The kit allows the main body of the FT-857/D to be installed in the trunk, or anywhere else out of the way. The kit consists of:

• Front Panel Nest
• Controller Extension Cable
• Speaker Extension Cable
• Microphone Extension Cable
• Double-Sided Adhesive Tape
• Mounting Screws, Washers & Nuts

Microfoni kaabel ja esipaneeli kaabel

• Mikrofoni kaabel on RJ45 (8 pin) pistikutega ja otsekabel. (Straight Cable)
• Esipaneeli kaabel on RJ12 (6 pin) pistikutega ja otsekaabel. (Straight Cable)

Lisa filtrid

3.8 kHz filter (526-8710-010) - This gives you a very open and rich sound in SSB.

Kaitsmed

2 X 25A.

Toitekaabel

6-pin DC plug, with 4-pins 

Voolu tarbivus

                                                14V  	12V  
Vastuvõtul SSB, minimaalse heliga (145МHz)	470мА	----
Vastuvõtul SSB, minimaalse heliga  (HF)        620мА	610мА
Vastuvõtul SSB, keskmise heliga  (HF)	        640мА	630мА
Vastuvõtul SSB, maksimaalse heliga  (HF)       790мА	770мА
CW, saatel, 100W                                 19А	17А
CW, saatel, 50W                                  12А	9.9А
CW, saatel, 20W                                 8.2А	7.5А
CW, saatel, 5W                                  3.9А	3.1А
SSB, saatel ilma helita                         1.4А	----

Puudused

• 2m ala on maha lõigatud - 137-164 (võiks olla 137-174 nagu on seda teised allband jaamad)
• AM-s on saade vaid 25W. Võiks olla 100W.
• PTT kaabli abil arvutist AM-s saatele ei lähe !!!
• RX võiks olla lahti suuremalt.
• Helifiltrid algselt jaamas puuduvad, ICOM jaamadel näiteks on korraga olemas.

Muud tähelepanekud, mis menüüs võivad kogemata jääda aktiveerituks

• Kui menüü Nr: 22 on aktiveeritud s.o. CW AUTO MODE = ON, siis jaam läheb saatele CW modes !!!

Programming software

• http://www.g4hfq.co.uk/ftbasic.html - FTBasicMMO

• http://chirp.danplanet.com/projects/chirp/wiki/Home - Chirp - Win, Linux, MAC-OS

• http://www.rtsystemsinc.com/yaesu_template.cfm - ADMS-4B (Uuemat versiooni saab kasutada ainult spetsiaalset kaablit omades, mille saab ainult softiga ostes, vanemad softid töötavad ka tavalise CT-62 CAT Interface kaabliga.

http://www.rtsystemsinc.com/Photos/USB62B.html

Jaama juhtimiseks

• http://www.ham-radio-deluxe.com/- HAM RADIO DELUX
• http://www.g4hfq.co.uk/download/FTBCATSetup.exe - FTBCATS
• http://www.supercontrol.de/cat/us/downloadsft857.php

Failid

• http://wiki.kuusit.ee/images/2/25/Yaesu_FT857-897_mods.pdf
• http://wiki.kuusit.ee/images/f/fe/Yaesu_FT857D_programming.pdf
• http://members.cruzio.com/~k6xx/radio/ft857ser.pdf
• http://w1npp.org/Equipment/FT-857D_Operating.pdf
• http://www.ldgelectronics.com/assets/manuals/YT-100Manual.pdf
• http://files.radioscanner.ru/files/download/file315/yaesu_ft_857_manual_rus.pdf
• http://k5ehx.net/857d-cheatsheet.pdf
• http://mcars.us/Manuals/FT-857D_OP_Manual.pdf

Välised lingid

• http://www.hampedia.net/yaesu/ft-857-installing-the-options.php
• http://www.hampedia.net/yaesu/ft-857d.php
• http://inradio.pl/dodatki/yaesu/ft857.pdf
• http://www.hampedia.net/yaesu/ft-857-mars-mod.php
• http://www.irdx.net/org/index.php?option=com_content&view=article&id=394:yaesu-ft-857-extended-tx&catid=12:radio-modification&Itemid=200055
• http://www.w3yy.com/FT897D-PSK.htm
• http://www.mds975.co.uk/Content/amateur_radio_projects.html
• http://whitesquallconsulting.com/products/plug-and-play-pactor-modem-kits/ptc-iiusb-modem-kits/yaesu-ft-857d/yaesu-ft-857d-modem-kit-with-pactor-3-license-and-bluetooth.html
• http://www.bhiltd.co.uk/html/cat-mate.html
• http://yo3hjv.blogspot.com/2008/07/ft-857d-backpack-kit.html
• http://www.universal-radio.com/catalog/hamantm/4547.html - Yaesu ATAS-120A Active Tuning Antenna System
• http://s273.photobucket.com/albums/jj213/VIham/
• http://www.hamlan.org/tech/ft8x7optocat/ft8x7optocat.htm
• http://www.qth.com/inrad/ft-897.htm
• http://www.demonsdxers.es/index.php?option=com_content&view=article&id=140:essb-en-yaesu-ft-857-y-ft-897&catid=56:sonido-y-essb&Itemid=61 - filters
• http://www.interceptradio.com/wiki/index.php/W7KI_Manpack_Radio
• http://www.box73.de/product_info.php?products_id=2361
• http://www.box73.de/download/bausaetze/BX-184.pdf
• http://www.yo3ggx.ro/
• http://www.zbm2.com/bluecat.html
• http://code.google.com/p/ft857d-arduino-library/
• http://iz4gjm.altervista.org/IZ4GJM%20NEW%20SITE/SDR%20e%20DRM%20Yaesu%20IZ4GJM.html

Portable Operations Yaesu FT-857D

• http://www.youtube.com/watch?v=jLSzSeajr7U
• http://www.youtube.com/watch?v=2uCHEepODJI
• http://www.youtube.com/watch?v=Nph5B3CBvno